beautypg.com

Setting the ip address – Paradyne 3163 User Manual

Page 35

background image

Operation

3-13

3163-A2-GB20-10

March 1999

Setting the IP Address

The IP address is the address used by the Telnet system

to access the DSU/CSU (see Appendix E,

IP Network

Addressing Scenarios

). For DSU/CSUs using PPP, the IP

address can be negotiated if the network device (e.g. a
router) supports such negotiation. The IP address is
composed of four fields with three digits per field
(xxx.xxx.xxx.xxx).

The IP address is set for the MODEM port or the COM

port, depending on which one has been chosen as the
Telnet communication link. The example below assumes
that an IP address of 010.155.111.222 is being set for the
COM port. You can use the same principles to assign any
value (between 000 and 255 for each digit field) to the
modem port.

"

Procedure

To assign an IP address to the COM port:

1. From the top-level menu screen, select Cnfig.

2. Select the configuration option set to be copied

into the Edit area by using the appropriate
Function key. Use the scroll keys, if necessary.

3. Select Edit.

4. From the Edit screen, press the

key until the

Mgmt selection appears on the screen.

5. Select Mgmt.

F1

Edit:
User

Alarm Mgmt

F2

F3

6. From the Mgmt Config screen, select Gen.

F1

Mgmt Config:
Gen

F2

F3

7. Press F1 (Next) until the Com IP Adr

configuration option appears.

NOTE

Steps 8 and 9 describe the
process for entering an IP
address. This process applies to
any IP address.

8. Press F2 (Edit) to edit the IP address. You have the

option of using F3 (Clear) to reset the IP address
to the factory default 000.000.000.000.

F1

Com IP Adr:
Next

Edit

Clear

F2

F3

9. Use the

and

keys to position the cursor

under the digit you want to change. Press F1 (Up)
to increment the digit or F2 (Down) to decrement
the digit. In this example, you would press
once to place the cursor under the middle digit in
the first digit field, then press F1 (Up) once to
change the 0 to a 1. Continue in this manner to
change the other digits.

F1

000.000.000.000
Up

Down

Save

F2

F3

10. When you are through changing the IP address,

you must press F3 (Save) to save the value.
Otherwise, the original value will be retained.

F1

010.155.111.222
Up

Down

Save

F2

F3