Establishing access security on a port, G-10 – Paradyne 3163 User Manual

Page 132

ACCULINK 3163 DSU/CSU

G-10

March 1999

3163-A2-GB20-10

Establishing Access Security
on a Port

Although the password feature is available, it is not

required. If used, it ensures access security before control
is passed to a device connected to a port. The following
procedure is an example only. It shows how to enable the
password for the communication port. Passwords can also
be enabled for the internal modem and for Telnet sessions.

Procedure

To establish access security on the communication

port:

1. From the Main Menu screen, select Configuration.

The Load Configuration From screen appears.

2. From the Load Configuration From screen, select

Current.

The Configuration Edit/Display screen appears.

3. From the Configuration Edit/Display screen,

select User Interface.

The User Interface Options screen appears.

4. From the User Interface Options screen, select

Communication Port.

The Communication Port Options screen appears.

5. In the Password Required field, enter Enable

(Figure G-8).

6. Select Save to store this setting in nonvolatile

memory.

The Save Configuration To screen appears.

7. From the Save Configuration To screen, select

Current.

The password itself is set separately. Refer to the

following section,

Setting a Password

ООООООООООООООООООООООООО

main /config/user/com

Customer ID: Node A

Model: 3163

COMMUNICATION PORT OPTIONS

Port Use:

Terminal

Port Type:

Asynchronous

Data Rate (Kbps):

9.6

Character Length:

Parity:

None

Stop Bits:

Ignore Control Leads:

Disable

Password Required:

Enable

Inactivity Timeout:

Enable

Disconnect Time (Minutes):

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Ctrl-a to access these functions, ESC for previous menu

MainMenu

Exit

Save

Enable
Password

Figure G-8. Enabling a Password