Paradyne 3163 User Manual

Page 47

Operation

3-25

3163-A2-GB20-10

March 1999

6. Press F3 (Edit) to change the displayed directory’s

phone number (phone numbers can be up to
40 characters). If you select Edit, the Edit screen
appears.

1: xxxxxxxxxxxxxxxxx
Next

Edit

7. Use the

and

keys to position the cursor

under the digit(s) you want to change. Press F1 to
scroll up to a higher digit. Press F2 to scroll down
to a lower digit. The

key inserts blanks

(default characters) while the

key invokes the

End Of Number (EON) character which
terminates the dial string and erases any characters
to the right when you use the Save function.

See Table 3-5 for the set of valid characters and
rules that apply to entering phone numbers.

Example: P9W8135551212

8. Press F3 (Save) to store your changes in

nonvolatile memory. If you press

before saving the phone number you just changed,
the previous phone number remains in effect.

1: xxxxxxxxxxxxxxxxx
Up

Down

Save

Table 3-5

Valid Phone Number Characters

Valid Characters

Meaning

Restrictions

0 to 9

DTMF or pulse digits

—

* #

DTMF digits

—

Selects Pulse dialing

Pulse or Tone must be specified, otherwise
Tone is the default. This must be the first
character in the string, unless the first character
is B. Then, it must immediately follow the B.

Selects Tone (DTMF) dialing

Tone or Pulse must be specified, otherwise
Tone is the default. This must be the first
character in the string, unless the first character
is B. Then, it must immediately follow the B.

Wait for dial tone

—

Blind dialing (you need not wait for a dial tone
before entering the dialing sequence)

To be valid, this must be the first character in
the string.

Creates a 2-second pause in the dialing
sequence

—

( ) -

Extra characters for readability. The space is
the default character.

—

End Of Number (EON) character, terminates
the dial string and erases all characters to the
right after F3 (Save) is pressed

—