Paradyne 3163 - Manual (Page 40)

ACCULINK 3163 DSU/CSU
3-18 March 1999 3163-A2-GB20-10
Block or ACAMI Assignment Method
The Assign By configuration option screen appears
after you select a port.
"
Procedure
To assign by the block or ACAMI method:
1. Press F2 for Block or F3 for ACAMI.
F1
Assign By:
Next Block ACAMI
F2 F3
or
F1
Assign By:
Next Block ACAMI
F2 F3
2. Press F1 (Next) to display the next configuration
option (Port Rate).
F1
Port Rate:384
Next
64 128
F2 F3
3. Use the or key to scroll the desired port
rate onto the screen. Rates scroll in groups of
three. Available selections depend on the current
base rate selected for the port. Press the
corresponding Function key to select the port rate.
Then, select Next to display the Start At
configuration option on the screen.
4. The Start At screen displays the network channels.
Use the or key to scroll the desired
channel onto the screen. Use the Function keys to
select the starting channel. Only those DS0
channel numbers that provide enough bandwidth
(based on the configured data rate) to be used as a
starting channel number are displayed. Channel
allocation for this port can only be cleared by
selecting Clear.
F1
Start At:Clear
Next
Clear N1
F2 F3