Performance reports – Paradyne 3163 User Manual

Page 57

Monitoring and Testing

4-5

3163-A2-GB20-10

March 1999

Performance Reports

When the network interface is configured for ESF

operation, network performance is continuously
monitored and maintained in two sets of aggregate
registers: Carrier Network Interface Registers (Telco) and
User Network Interface Registers (User). The User
registers contain an extra status register (Status Event).
Registers shown on the front panel LCD are listed in

Table 4-3

. These registers are status registers that collect

performance data for the previous 24-hour period.
Performance data is updated in 15-minute intervals. After
15 minutes, the current interval is rolled over into a set of
accumulator registers that represent the previous 96
15-minute intervals for the register. An interval total of
how many of the 96 registers contain valid data is also
kept, as well as a 24-hour total for each accumulator
register.

Procedure

To display User Network Interface (User) performance:

1. From the top-level menu screen, select Stat.

2. From the Status screen, select Perf.

Status:
DevHS STest Perf

3. Select User registers.

Performance:
Telco

User

4. From the User Registers screen, press F1 to view

current registers (go to Step 5), press F2 to view
24-Hour Totals (go to Step 6), or press F3 to view
15-Minute Interval Registers (go to Step 7).

User Registers:
Cur

24Tot

Intvl

5. When you press F1 from the User Registers

screen, the User registers for the current
15-minute interval appear.

User Current:
Event =

xx,xxx

6. When you press F2 from the User Registers

screen, the User registers for the 24-hour total
interval appear.

User 24 Hour:
VldIntvl =

7. When you press F3 from the User Registers

screen, the interval screen appears. Use this screen
to choose the specific 15-minute interval.

User Intvl: 01
Up

Down

Dsply

8. Use the

and

keys to position the cursor

under the first or second digit in the interval
number displayed, then use the F1 (Up) and
F2 (Down) keys to increment/ decrement the
number.

9. When you have selected the number of the interval

you want to display, press F3 (Dsply) to display
the registers for the interval selected. Use the
scroll keys to view additional register information.

User Intvl:

ES=

xxx