Aborting a lamp test – Paradyne 3163 User Manual

Page 70

ACCULINK 3163 DSU/CSU

4-18

March 1999

3163-A2-GB20-10

Test:
Lpbk

Ptrns

Lamp

4. From the Lamp Test screen, select Start.

Lamp Test:
Abort

Start

5. The following screens alternately appear on the

LCD until you press a Function key to return to
the Lamp Test screen. In addition, all LEDs blink.

0123456789 : ; < = > ?
@ABCDEFGHIJKLMNO

6. When you are satisfied that all LEDs are lighting

and the LCD is functioning properly, abort the
Lamp test from the Lamp Test screen. If there is
no activity on the DSU/CSU front panel for five
minutes, the Device Health and Status screen
appears automatically. However, the Lamp test
remains active until it is aborted.

Aborting a Lamp Test

Procedure

To abort the Lamp test:

1. Display the Lamp Test screen. To do this when the

LCD is alternating the Lamp test screens, press
any Function key. Otherwise, follow Steps 1
through 3 for starting a Lamp test.

Lamp Test:
Abort

Start

2. From the Lamp Test screen, select Abort.

Lamp Test:
Abort

Start