Setting a password, G-11, Following section – Paradyne 3163 User Manual

Page 133

Asynchronous Terminal Interface Operation

G-11

3163-A2-GB20-10

March 1999

Setting a Password

In addition to establishing access security on a port

specify otherwise, the password is null.

Procedure

To set a password:

1. From the Main Menu screen, select Control.

The Control screen appears.

2. From the Control screen, select Administer

Password.

The Password Entry screen appears (Figure G-9).

This screen is used to add a new password or
modify an existing password.

3. Enter a new password in the Password field.

The password may be 1 to 8 characters long and
may contain the characters 0 through 9, a
through z, and/or A through Z.

4. Use the Re-Enter Password field to verify the new

password.

5. Select Save.

Once a password is saved, the Login Records Saved

message appears at the bottom of the screen.

ООООООООООООООООООООООООО

main /control/admin_password

Customer ID: Node A

Model: 3163

PASSWORD ENTRY

Password:

Re-Enter Password:

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Ctrl-a to access these functions, ESC for previous menu

MainMenu

Exit

Save

Enter New
Password

Re-Enter
Password

Save
Password

Figure G-9. Setting a Password