Paradyne 3163 - Manual (Page 29)

Operation
3-7 3163-A2-GB20-10 March 1999
Displaying Unit Identity
The identity of the DSU/CSU (serial number, model
number, software revision level, hardware revision level,
and customer identification) is available through the
Status branch of the front panel menu (see Appendix A,
Front Panel Menu ).
The customer identification is the only identity number
you can change.
"
Procedure
To display the DSU/CSU’s identity (ID):
1. From the top-level menu screen, select Stat.
F1
DSU ESF
Stat
Test Cnfig
F2 F3
2. From the Status screen, press the key until the
ID selection appears on the screen.
3. Select ID.
F1
Status:
TStat
LED ID
F2 F3
4. The following screens appear in the order listed
each time you press the key.
F1
Identity:
Ser=
xxxxxxx
F2 F3
F1
Identity:
Mod=
xxxx-xx-xxx
F2 F3
F1
Identity:
Cust ID=
xxxxxxxx
F2 F3
F1
Identity:
SRev=
xx.xx.xx
F2 F3
F1
Identity:
CCA=
xxxx-xxx
F2 F3