Setting customer identification – Paradyne 3163 User Manual

Page 127

Asynchronous Terminal Interface Operation

G-5

3163-A2-GB20-10

March 1999

NOTE

The following procedures are
examples only. This appendix
uses examples to help you
become familiar with the use of
the ATI for DSU/CSU control.

Setting Customer
Identification

The customer identification is used to uniquely identify

the DSU/CSU.

Procedure

To change the customer identification (Customer ID):

1. From the Main Menu screen, select Control.

The Control screen appears.

2. From the Control screen, select Customer ID.

The Customer ID screen appears (Figure G-3).

3. Use the Customer ID field to set the customer

identification.

The customer identification may be up to
8 characters long.

Select Clear to remove all the characters in the
associated field.

4. Select Save to store the information in nonvolatile

memory.

In addition to the customer identification, you may also

enter a system name, system location, and system contact.
Although only 40 characters are displayed for these fields,
you may enter up to 255 characters. The fields scroll as
the additional characters are added.

ООООООООООООООООООООООООО

main /control/customer id

Customer ID: Node A

Model: 3163

CUSTOMER ID

Customer ID:

Clear

System Name:

Clear

System Location:

Clear

System Contact:

Clear

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Ctrl-a to access these functions, ESC for previous menu

MainMenu

Exit

Save

Customer
Identification
Field

Figure G-3. Customer Identification Screen