Paradyne 3163 - Manual (Page 33)

Operation
3-11 3163-A2-GB20-10 March 1999
4. From the Edit screen, select the functional group
you want to edit by pressing the appropriate
Function key. Use the scroll keys, if necessary.
(The User selection is shown as an example only.)
F1
Edit:
Chan
Gen User
F2 F3
The configuration options for the selected
functional group appear on the front panel one
option at a time. The option name appears on
Line 1 with the current value next to it. To reach
other options, use the Next and Previous selections
to scroll forward and backward through the group
of options.
F1
Self-Test:Enable
Next
Disable
F2 F3
5. Press the appropriate Function key to choose
another value. Use the scroll keys, if necessary.
6. Use the Save procedure to save your changes to
the Active or Customer area.
Saving Edit Changes
Save edit changes to the Active area when you want
those changes to take effect immediately. Save edit
changes to the Customer area when you want to overwrite
the existing Customer configuration options and store
these changes for future use.
NOTE
If you attempt to exit the Edit
function after making changes
without performing a Save, the
DSU/CSU prompts you with Save
Options? Choose Yes or No.
"
Procedure
To save edit changes:
1. From the Choose Funct screen (one level above
the Edit screen, two levels below the top-level
menu screen), select Save.
F1
Choose Funct:
Edit
Save
F2 F3
2. Choose whether you want to save to the Active,
Customer 1, or Customer 2 area. Use the scroll
keys, if necessary.
F1
Save Edit to:
Activ
Cust1
F2 F3