Philips HEARTSTART XLT M3500B - Manual (Page 82)

Disabling Sync Mode
7-4 Performing Synchronized Cardioversion
Delivering Additional Synchronized Shocks
If additional synchronized shocks are indicated, make sure Sync Mode is still
enabled and repeat steps 2-5. In its default configuration, the HeartStart XLT
remains in Sync Mode after a shock is delivered, as indicated by the message
6\QF on the display and the lighted green LED next to
.
The HeartStart XLT can be configured to exit Sync Mode after each shock is
delivered.
Disabling Sync Mode
To disable Sync Mode, press . The green LED next to goes
out and the message
6\QF is no longer displayed. Sync Mode is also disabled
when you exit Manual Mode.
Sync
Sync Sync