Philips HEARTSTART XLT M3500B - Manual (Page 26)

Getting Acquainted
2-6 Getting Started
Figure 2-3 AED Mode Display Layout (ECG and SpO
2
disabled)
NOTE In its default configuration, the HeartStart XLT powers on in AED Mode
where voice prompts and user messages are active.
The Incident Timer shows the elapsed time since the HeartStart XLT was
turned on. If the HeartStart XLT is powered on after being off for less than
two minutes, the Incident Timer resumes where it left off. If power is off for
more than two minutes, the Incident Timer resets to zero (
).
ANALYZE PAUSE
00:15:02
Shocks: 0
User Message
SHOCK
150J
ECG
Current Charge
Shocks Delivered
Incident Timer
System Message
Momentary Message
ECG Gain
Defibrillation
Soft Keys