Procom VOR/ILS Analyzer EVS200 - Manual (Page 55)

VOR/ILS Analyzer EVS200
0796.1800.02 E-8 46
Chapter 3: Operation
Command D2
command function
D2 switching over to Display2
The command D2 enables the switching over to the content of display2 in the VOR / ILS mode.
This is the prediction for reading out the data of the corresponding mode (VOR/ILS).
Example:
command from the controller response of the VOR/ILS Analyzer EVS200
input: D2
d2 READY
READY
Command AF8
command function
AF8 AF-frequency ID query
The command AM8 reads the actual AF frequency (ID) in the ILS / VOR mode.
Prediction for reading out the data of the corresponding mode (VOR/ILS) is the
switching over to display2.
Example:
command from the controller response of the VOR/ILS Analyzer EVS200
query: AF8
af8 e.g. 1020.0Hz
e.g. 1020.0Hz
Command AM8
command function
AM8 query of AM-modulation depth (ID)
The command AM8 reads the actual AM-modulation depth (ID) in the ILS / VOR mode.
Prediction for reading out the data of the corresponding mode (VOR/ILS) is the
switching over to display2.
Example:
command from the controller response of the VOR/ILS Analyzer EVS200
query: AM8
am8 e.g. 10.0%
e.g. 10.0%