Procom VOR/ILS Analyzer EVS200 - Manual (Page 16)

VOR/ILS Analyzer EVS200
0796.1800.02 E-8 7
Chapter 2: Preparation for Operation
Preparation for operation
Placing the unit
The VOR/ILS Analyzer EVS200 can be operated in any position without reduction in its function. Even
shocks during normal transportation or on mobile operation don’t reduce its function.
The unit works at ambient temperatures of -5 to +40°C.
Mains operation
Safety Rules
The VOR/ILS Analyzer EVS200 meets the safety rules in ag-
reement with VDE 0411 and VDE 0804 of safety class I. In
agreement with safety class I all mains circuitry must be insula-
ted and the requirement is a good conductive and durable
together and ground wire connection of all touchable, con-
ductive parts of the unit which can directly be alive in case of a
failure.
Mains connector (earthed plug) put only into a protective
contact socket. If there is a connector it must durable be
connected with a ground wire. The ground wire must not
be insulated.
Mains connection
Connect the VOR/ILS Analyzer EVS200 with the supplied power cord to the AC supply
(87 to 265 VAC / 47 to 63 Hz or corresponding to the technical data).
If the unit shall be connected to another AC supply the
corresponding safety rules must be observed!