Procom VOR/ILS Analyzer EVS200 - Manual (Page 10)

VOR/ILS Analyzer EVS200
0796.1800.02 E-8 1
Chapter 1: Operator Information
Important operator information
The symbols used in this description have the following meaning.
Attention: increased vigilance!
Indexfinger: indicates important details
/
Workstep, alphanumeric sequence definition of a workstep!
Before connecting the unit to a vehicle’s 12-VDC board supply, pay
attention that the battery’s negative pole is connected to ground
(GROUND ) of the vehicle!
Finishing and connection of the auxiliary FO cable jack is
described in chapter „VDC connection" in section 2 "Preparation for
Operating".
Whilst time of warranty a defective internal battery (option) may
only be changed by Rohde & Schwarz service personnel!
Also after the warranty time it is recommended that
only specialists change the internal battery.