Procom VOR/ILS Analyzer EVS200 - Manual (Page 43)

VOR/ILS Analyzer EVS200
0796.1800.02 E-8 34
Chapter 3: Operation
Command VER
command function
VER query of version number and date of the
EVS200 firmware
The command VER initializes the display of the software version number and its issue date.
Example:
command from the controller response of the VOR/ILS Analyzer EVS200
query: VER
ver
EVS200 - VERSION < No. > from < Date >
Copyright (C) Rohde & Schwarz Werk Köln
Command ML
command function
ML
∆∆∆∆
level mode setting
The command ML enables a switching over to the "
∆∆∆∆
level" mode.
Exampel :
command from the controller response of the VOR/ILS Analyzer EVS200
input: ML
ml READY
READY
Command MV
command function
MV VOR mode setting
The command MV enables a switching over to the "VOR“ mode.
Example:
command from the controller response of the VOR/ILS Analyzer EVS200
input: MV
mv READY
READY