Procom VOR/ILS Analyzer EVS200 - Manual (Page 47)

VOR/ILS Analyzer EVS200
0796.1800.02 E-8 38
Chapter 3: Operation
Command BW0
command function
BW0 8-kHz bandwidth setting
The command BW0 enables the switching over to the 8-kHz bandwidth in the ILS mode and in the
"
∆∆∆∆
level" mode.
Example:
command from the controller response of the VOR/ILS Analyzer EVS200
input: BW0
bw0 READY
READY
Command BW1
command function
BW1 30-kHz bandwidth setting
The command BW1 enables the switching over to the 30-kHz-IF bandwidth in the ILS mode and in
the "
∆∆∆∆
level" mode.
Example:
command from the controller response of the VOR/ILS Analyzer EVS200
input: BW1
bw1 READY
READY