Procom VOR/ILS Analyzer EVS200 - Manual (Page 44)

VOR/ILS Analyzer EVS200
0796.1800.02 E-8 35
Chapter 3: Operation
Command MI
command function
MI ILS mode setting
The command MI enables the switching over to the "ILS“ mode.
Example:
command from the controller response of the VOR/ILS Analyzer EVS200
input: MI
mi READY
READY
Command MB
command function
MB BEACON mode setting
The command MB enables the switching over to the "BEACON mode“.
Example:
command from the controller response of the VOR/ILS Analyzer EVS200
input: MB
mb READY
READY
Mode related control commands
ILS-Mode
Command DD0
command function
DD0 DDM value query
The command DD0 reads the actual DDM value (value without dimension) in the ILS mode.
Example:
command from the controller response of the VOR/ILS Analyzer EVS200
query: DD0
dd0 e.g. 0.2008
e.g. 0.2008