Chapter 2. server setup roadmap, Chapter, Server – Lenovo 3797 User Manual
Page 21: Setup, Roadmap

Chapter
2.
Server
setup
roadmap
The
installation
process
varies
depending
on
the
configuration
of
the
server
when
it
was
delivered.
In
some
cases,
the
server
is
fully
configured
and
just
needs
to
be
installed
in
the
rack,
connected
to
power
and
the
network,
and
started.
In
other
cases,
the
server
needs
to
have
hardware
features
installed,
requires
hardware
and
firmware
configuration,
and
requires
the
operating
system
to
be
installed.
Table
2.
Server
setup
roadmap
Task
Where
to
find
information
Unpack
Install
hardware
features
Install
in
the
rack
Rack
Installation
instructions
(printed
and
on
ThinkServer
Documentation
DVD)
Connect
Ethernet
cable
and
power
cords
to
network
and
power
connectors
Start
the
server
to
verify
operation
Review
UEFI
settings
and
customize
as
needed.
Configure
RAID
controllers
and
arrays
Check
for
firmware
updates.
Install
operating
system
and
basic
drivers
Install
any
additional
drivers
needed
for
added
features
Refer
to
the
instructions
that
came
with
the
hardware
option.
Configure
Ethernet
settings
in
operating
system
See
the
operating
system
help.
This
step
is
not
required
if
the
operating
system
was
installed
using
the
ThinkServer
EasyStartup
program.
Test
Integrated
Management
Module
(requires
the
IMM
Premium
option)
Install
remote
management
applications
Install
applications
Refer
to
the
documentation
that
accompanies
the
applications
that
you
want
to
install.
©
Lenovo
2009.
Portions
©
IBM
Corp.
2007.
5