Working with photos using the computer, Printing photos using the computer – Lexmark 5300 User Manual
Page 76
Notes:
•
Make sure the PictBridge-enabled digital camera is set to the correct USB mode. For more information, see
the camera documentation.
•
The printer recognizes one active media device at a time. If you insert more than one media device, a message
appears on the display prompting you to designate the device you want the printer to recognize.
•
If you have a memory card inserted when you connect a PictBridge-enabled camera, an error message will
be displayed telling the you to remove one of the devices.
•
If the PictBridge connection is successful, the following appears on the printer display: PictBridge
camera detected. Press
to change settings. If any other message appears, see “Error
messages on the printer display” on page 158.
•
Values selected within the menu items are the settings used for Pictbridge printing if no explicit selection is
made from the camera.
3
Follow the instructions in the camera documentation to select and print photos.
Note: If the printer is turned off while the camera is connected, you must disconnect and then reconnect the camera.
Related topics:
•
“Connecting photo storage devices” on page 67
•
“Understanding the PictBridge menu” on page 71
Working with photos using the computer
Note: To prevent smudging or scratching, avoid touching the printed surface with your fingers or sharp objects. For
best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at least 24
hours before stacking, displaying, or storing.
Printing photos using the computer
1
Load photo paper, with the glossy or printable side facing you. (If you are not sure which side is the printable
side, see the instructions that came with the paper.) For more information, see “Loading paper” on page 6.
2
Customize the settings as needed in the Page Setup dialog.
a
With a photo open, choose File Page Setup.
b
From the “Format for” pop-up menu, choose 5300 Series.
c
From the Paper Size pop-up menu, choose the paper size loaded.
Working with photos
76