Lexmark 5300 User Manual
Page 155
C
HECK
PAPER
LOADING
•
Load a smaller amount of paper into the printer.
•
Load paper with the print side facing you. (If you are not sure which side is the printable side, see the instructions
that came with the paper.)
See “Loading paper” on page 6 and its related topics for information about:
•
Maximum loading amounts per paper type
•
Specific loading instructions for supported paper and specialty media
R
EMOVE
EACH
PAGE
AS
IT
IS
PRINTED
Remove each page as it exits, and let it dry completely before stacking.
A
DJUST
THE
PAPER
GUIDES
Adjust the paper guides:
•
When using media less than 8.5 inches wide
•
To rest against the edges of the paper or media, making sure it does not buckle
Printer does not feed paper, envelopes, or specialty media
These are possible solutions. Try one or more of the following:
C
HECK
FOR
PAPER
JAMS
Check for and clear any paper jams. For more information, see “Jams and misfeeds troubleshooting” on
page 154.
C
HECK
MEDIA
LOADING
•
Verify that the specialty media is loaded correctly.
•
Try loading one page, envelope, or sheet of specialty media at a time.
For more information, see the “Getting Started” section in the “Printing” chapter.
M
AKE
SURE
THE
PRINTER
IS
SET
AS
THE
DEFAULT
PRINTER
AND
IS
NOT
ON
HOLD
OR
PAUSED
To set printer as default:
1
From the Finder desktop, choose Applications Utilities Print Center or Printer Setup Utility, depending
on the operating system version you are using.
2
From the Printer List dialog, select your printer.
Troubleshooting
155