Siemens Industrial Ethernet Switches SCALANCE X-200 - Manual (Page 198)

Configuration / diagnostics using remote mechanisms
6.3 Configuration using Web Based Management (WBM) and Command Line Interface (CLI)
SCALANCE X-200
198
Operating Instructions, 12/2011, A5E00349864-19
Syntax of the Command Line Interface
Table 6- 17 Agent Trap Configuration - CLI\AGENT\TRAP>
Command Description Comment
info Shows the trap configuration
table.
traps [E ¦ D] Enables / disables traps. Administrator only.
settrap Enables / disables the trap IP
address to be specified.
Administrator only.
6.3.5.20 The "Agent SNMP Config Groups" WBM menu
Agent SNMP Configuration Groups
In this screen, you create or delete user groups for device access using SNMPv3. You can
decide whether or not members of a group need to authenticate themselves, whether they
communicate with encryption and whether they have read and write permissions.
Figure 6-25 Agent SNMP Configuration Groups screen