Siemens Industrial Ethernet Switches SCALANCE X-200 - Manual (Page 165)

Configuration / diagnostics using remote mechanisms
6.3 Configuration using Web Based Management (WBM) and Command Line Interface (CLI)
SCALANCE X-200
Operating Instructions, 12/2011, A5E00349864-19
165
You apply your settings with Set Values.
Syntax of the Command Line Interface
Table 6- 2 System Configuration - CLI\SYSTEM>
Command Description Comment
info Shows the current system information.
devname [Device Name] Sets the "PNIO Device Name" variable. Administrator only
name [sysName] Sets the "sysName" variable. Administrator only
contact [sysContact] Sets the "sysContact" variable. Administrator only
location [sysLocation] Sets the "sysLocation" variable. Administrator only