Siemens Industrial Ethernet Switches SCALANCE X-200 - Manual (Page 196)

Configuration / diagnostics using remote mechanisms
6.3 Configuration using Web Based Management (WBM) and Command Line Interface (CLI)
SCALANCE X-200
196
Operating Instructions, 12/2011, A5E00349864-19
Write Community String
Displays the user name for write access to SNMP variables. Here, changes can only be
made, when write protection (SNMP read only) has been disabled.
Traps
Here, you can enable or disable the sending of SNMP traps.
Syntax of the Command Line Interface
Table 6- 16 Agent SNMP Configuration - CLI\AGENT\SNMP>
Command Description Comment
info Displays information on SNMP.
snmp [A | 3 | D] Enables either [A] all SNMP versions or [3] only
SNMPv3 or [D] disables SNMP.
Administrator only.
readonly Enables / disables SNMPv1 read only mode. Administrator only.
getcomm [string] Specifies the Read Community string. Administrator only.
setcomm [string] Specifies the Write Community string. Administrator only.
traps [E ¦ D] Enables / disables SNMPv1 traps. Administrator only.