beautypg.com

17 the "ping" wbm menu – Siemens Industrial Ethernet Switches SCALANCE X-200 User Manual

Page 194

background image

Configuration / diagnostics using remote mechanisms

6.3 Configuration using Web Based Management (WBM) and Command Line Interface (CLI)

SCALANCE X-200

194

Operating Instructions, 12/2011, A5E00349864-19

Table 6- 15 Agent Configuration - CLI\AGENT\IP>

Command

Description

Comment

info

Displays information on the IP settings.

ip [IP address]

Specifies the IP address. DHCP is disabled.

Administrator only.

subnet [subnet mask]

Specifies the subnet mask.

Administrator only.

gateway [IP address]

Specifies the IP address of the default IP

gateway.

Administrator only.

dhcp [E ¦ D]

Enables / disables DHCP.

Administrator only.

dhcptype [M ¦ N ¦ C ¦ D]

Specifies the DHCP parameters:

- M MAC address

- N system name

- C client ID

- D PNIO device name

Administrator only.

clientid [client ID]

Specifies the DHCP client ID.

Administrator only.

6.3.5.17

The "Ping" WBM menu

Reachability of an address in an IP network

The ping function in Web Based Management has exactly the same function as the terminal

function of the same name. It checks whether an address exists in an IP network.

IP address

Enter the IP address of the network device you want to ping to test whether it can be

reached.
Repeat

Here, enter the number of data packets to be sent.
Ping

Click this button to start sending the data packets.
Ping Output

This box shows the output of the ping function.