Sun Microsystems StorageTek Modular Library System SL500 - Manual (Page 46)

Controls and Indicators
14 SL500 User’s Guide • July 2008 Revision: KA • 96116
RLC Card Indicators
The following table describes the RLC card indicators.
TABLE 1-7 RLC Card Indicators
Indicator Description
EJECT OK Indicator
LED is solid blue when the RLC card can be removed (Currently, only one
RLC card is available.).
FAULT Indicator
LED flashes red when the controller has detected a problem.
STANDBY Indicator
LED is yellow when the RLC card is not the active card (Currently, only one
RLC card is available.).
ACTIVE Indicator
LED is solid green when the RLC card is the active card (Currently, only one
RLC card is available.).