Sun Microsystems StorageTek Modular Library System SL500 - Manual (Page 299)

Library Utility Tasks
96116 • Revision: KA Chapter 7 SL Console Diagnostics and Utilities 267
▼
Perform a Library Self-Test
Note – The proper diagnostic cartridges for library drives must be present in the
library.
1. Select Tools > Diagnostics.
2. Click the Library folder on the device tree.
The Library screen appears.
3. Click the SelfTest tab.
Note – The self-test screen displays a Mode field with two options: disruptive and non-
disruptive. At present, only the non-disruptive option is valid.
4. Click the Run tab from the Options Bar.
During the self-test the SL Console window displays the status of the various
diagnostics being performed.