beautypg.com

Partitions-summary (step 2)-modify connection, Partitions—summary (step 2)—modify connection 204, Partitions—summary (step 2)—modify connection – Sun Microsystems StorageTek Modular Library System SL500 User Manual

Page 236: Sample screen description, Screen fields

background image

Partition Summary Screens

204 SL500 User’s Guide • July 2008

Revision: KA • 96116

Partitions—Summary (Step 2)—Modify Connection

Sample Screen

Description

Allows you to modify the configuration of the selected host-partition connection.

This screen is a popup that appears when you click Modify Connection on the

Partitions—Summary (Step 2)

screen.

Caution –

Information in the SL Console partition workspace is saved to the library

controller database only through the Commit (Step 4) screen. If your SL Console

session ends or you refresh the workspace data before you have committed your

updates through the Commit (Step 4) screen, you will lose any partition changes you

have made through the Summary (Step 2) and Design (Step 3) screens and all

associated popups.

Screen Fields

Connections n

Display only.
Partition ID of the selected partition.

Initiator (WWPN)

World Wide Port Name of the host bus adapter (HBA).
Sixteen hexadecimal digits. You can enter upper- or lower-case hex digits, but the

display is always shown in all upper-case.
The screen displays the value assigned previously. You can leave it as is or make

changes.
Target Port
Display only.
Port number of the SL500 library controller. This entry is always “0”.

LUN

Required.