Sun Microsystems StorageTek Modular Library System SL500 - Manual (Page 300)

Library Utility Tasks
268 SL500 User’s Guide • July 2008 Revision: KA • 96116
▼
Reboot the Library
Note – This feature is available starting with SL500 firmware version 1026 and
SL Console version 2.40.
Use this procedure to reboot the library. This process involves reloading the firmware
from flash memory and restarting the library controller.
1. Select Tools > Diagnostics.
2. Click the Library folder on the device tree.
The Library screen appears.
3. Click Reboot in the Options Bar.
The Reboot confirmation popup appears.
4. Click OK to continue.
If the library is online, the Offline confirmation popup appears.
5. Click OK to vary the library offline.
The Reboot confirmation popup appears
6. Click OK to continue.
The SL Console termination popup appears.