Sun Microsystems StorageTek Modular Library System SL500 - Manual (Page 131)

Drive Management Tasks
96116 • Revision: KA Chapter 3 SL500 Automated Library Operations 99
▼
Display Drive Summary Information
Use this procedure to display summary information for all drives in the library.
If you need to perform a manual mount to a drive, this procedure displays a mapping
of all addresses for each library drive:
Note – This information is also available through Reports > Drive Summary. See
“Display a Library Report” on page 74 for detailed instructions.
1. Select Tools > System Detail.
2. Click the Drive folder on the device tree.
The screen lists the library drives and displays their locations.