Sun Microsystems StorageTek Modular Library System SL500 - Manual (Page 377)

Specifications
96116 • Revision: KA Appendix A SL500 Wall Diagrams and Specifications 345
Library Component Weights
The following table lists the weights of the library, tape drives and trays, and
cartridges.
Library Environment
The following table lists the library environment specifications.
TABLE A-2 Library Component Weights
Component Weight
Base module with 1 power supply, 2 LTO tape drives, and robotics unit 44.5 kg (98.0 lb)
Drive expansion module (DEM) with one power supply and four LTO
tape drives
41.3 kg (91.0 lb)
Cartridge expansion module (CEM) 20.1 kg (44.2 lb)
Robotics unit 10.1 kg (22.2 lb)
Power supply 2.3 kg (5.1 lb)
HP LTO Ultrium tape drive and tray assy 3.6 kg (7.9 lb)
IBM LTO Ultrium tape drive and tray assy 4.5 kg (9.9 lb)
SDLT LVD tape drive and tray assy 4.2 kg (9.3 lb)
SDLT FC tape drive and tray assy 4.1 kg (9.0 lb)
DLT-S4 tape drive and tray assy 3.88 kg (8.6 lb)
Tape drive tray assy without tape drive 1.5 kg (3.4 lb)
LTO Ultrium cartridge 221.0 g (7.8 oz)
TABLE A-3 Library Environment Specifications
Item
Measurements
Operating Storage Transporting
Temperature
+10 to +40ºC
(+50 to +104ºF)
+10 to +40ºC
(+50 to +104ºF)
-40 to +60ºC
(-40 to +140ºF)
Humidity 20 to 80% 10 to 95% 10 to 95%
Wet bulb (maximum,
noncondensing)
+29.2ºC
(+84.5ºF)
+35ºC
(+95ºF)
+35ºC
(+95ºF)
Altitude -76 to 3,048 m (-250 to 10,000 ft)