Sun Microsystems StorageTek Modular Library System SL500 - Manual (Page 41)

Library with Mixed-Media Storage Cells
96116 • Revision: KA Chapter 1 SL500 Introduction 9
Adding Mixed-Media Storage Cell Capacity
If your needs have increased, you can increase the storage cell capacity and the number
of tape drives in the library. TABLE 1-2 lists how many storage cells and tape drives
can be gained by adding each Drive Expansion Module. The expansion modules are
installed into the same rack as the existing modules.
You can also add a redundant power supply. Contact your marketing representative.
TABLE 1-2 Mixed-Media Storage Cell and Tape Drive Capacities
Modules
Maximum Number of Tape
Drives
CAP
Cells
Total # of
Storage
Cells
2 6 10 14 18
Base module 24 4 28
18-cartridge upgrade 42 4 46
Adding 1 expansion module
Base module plus 1 limited DEM
86 12 98
Base module plus 1 full DEM
(with 33-cartridge upgrade)
119 12 131
Base module plus 1 CEM 140 12 152
Adding 2 expansion modules
Base module plus 2 DEMs
189 20 209
Base module plus 1 DEM, 1 CEM 210 20 230
Base module plus 2 CEMs 240 20 260
Adding 3 expansion modules
Base module plus 3 DEMs
259 28 287
Base module plus 2 DEMs, 1 CEM 280 28 308
Base module plus 1 DEM, 2 CEMs 310 28 338
Base module plus 3 CEM 340 28 368
Adding 4 expansion modules
Base module plus 4 DEMs
329 36 365
Base module plus 3 DEMs, 1 CEM 350 36 386
Base module plus 2 DEMs, 2
CEMs
380 36 416
Base module plus 1 DEM, 3 CEMs 410 36 446
Base module plus 4 CEMs 440 36 476