Sun Microsystems StorageTek Modular Library System SL500 - Manual (Page 304)

Library Utility Tasks
272 SL500 User’s Guide • July 2008 Revision: KA • 96116
▼
Activate Code on the Library Controller
Activating the code makes the code residing in the library controller ready for
operation.
1. Select Tools > Diagnostics,
2. Click the Library folder on the device tree.
The Library screen appears.
3. Click the Activate Code tab.
4. Click the Target on the pull-down menu.
Note – Target refers to firmware package (.img file) containing the SL500 library code.
5. Click the code to activate from the Available Versions section.