Sprint Nextel M520 - Manual (Page 36)

20 Section 2A. Phone Basics
Using the Phone Charger
ᮣ Plug the terminal end of the charger into the
phone’s power interface connector and the other
end into an electrical outlet.
Ⅲ The battery charge state (charged/charging) is
indicated on the phone’s display screen. Three
bars on the battery icon (
) indicate a fully
charged battery.
UL Certified Phone Charger
The phone charger for this phone has met UL 1310
safety requirements. Please adhere to the following
safety instructions per UL guidelines.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED
MAY LEAD TO SERIOUS PERSONAL INJURY AND
POSSIBLE PROPERTY DAMAGE.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, CAREFULLY FOLLOW THESE
INSTRUCTIONS. FOR CONNECTION TO A SUPPLY NOT
IN THE U.S.A., USE AN ATTACHMENT PLUG ADAPTOR
OF THE PROPER CONFIGURATION FOR THE POWER
OUTLET. THIS POWER UNIT IS INTENDED TO BE
CORRECTLY ORIENTED IN A VERTICAL OR
HORIZONTAL OR FLOOR MOUNT POSITION.
DEF
TUV
WX YZ
PQRS
MNO
JKL
GHI
Shif t
Ne xt
Spac
e
+
Incorrect
Correct
Note It takes about three hours to fully recharge a
completely rundown (discharged) battery.
M520_Sprint.book Page 20 Thursday, September 18, 2008 12:34 PM