Sprint Nextel M520 User Manual
Page 104
88
Adapting Digit Dial
Digit Dialing is speaker independent, which means that
no training or adaptation is required. Some users with
heavy accents or unusual voice characteristics may
find difficulty in achieving high accuracy with speaker-
independent Digit Dialing, so the Adapt Digits feature
allows users to dramatically improve the digit accuracy
through adaptation. Users who get acceptable digit
recognition accuracy will find no additional benefit to
performing the Adapt Digit adaptation.
After you adapt Digit Dial, your phone will be
customized to your voice. Other people will not be able
to use Digit Dial on your phone unless they reset the
phone to factory defaults.
Adaptation involves recording several digit sequences
to teach the system your voice. The adaptation process
takes about three minutes.
Tips for adapting Digit Dial:
ⅷ
Adapt digits in a quiet place.
ⅷ
Make sure you wait for the beep before starting to
speak.
ⅷ
Speak clearly, but say each digit sequence naturally.
ⅷ
If you make a mistake while recording a sequence of
digits, or if there is an unexpected noise that spoils
the recording, you can say or select “No” when the
prompt asks, “Did the recording sound OK?” You will
then be prompted to rerecord the sequence.
To adapt Digit Dial to your voice:
1.
While in standby mode, select
Main Menu > Tools >
Voice Services
.
2.
Press
Settings
(left softkey)
> Digit Dialing >
Adapt Digits
.
3.
Press
OK
(left softkey) to begin the process. (The
phone displays the first digit sequence.)
Note
ONLY
adapt Digit Dial if the system is frequently
misrecognizing your speech. You can always restore
the system to its original factory setting.
M520_Sprint.book Page 88 Thursday, September 18, 2008 12:34 PM