Sprint Nextel M520 - Manual (Page 135)

Blu
e
toot
h
Section 2K. Bluetooth 119
My Bluetooth Device Name
By default, your device is given the Bluetooth name
“SPH-M520.” You may wish to assign a unique name
to avoid confusion if there are other similarly named
devices within the Bluetooth coverage range.
To change your phone's Bluetooth name:
1. While in standby mode, select Main Menu > Settings
> Bluetooth > Device Name .
2. Press and hold to clear the current name.
3. Enter a new name and press to save and exit.
My Bluetooth Address
ᮣ While in standby mode, select Main Menu > Settings
> Bluetooth > Device Info .
Device Profile
To specify a Bluetooth device type:
1. While in standby mode, select Main Menu > Settings
> Bluetooth > Select Device type .
2. Select Hands-Free or HeadSet .
Voice Caller ID
To enable Bluetooth voice caller ID:
ᮣ While in standby mode, select Main Menu > Settings
> Bluetooth > Voice Caller ID > On .
To disable Bluetooth voice caller ID:
ᮣ While in standby mode, select Main Menu > Settings
> Bluetooth> Voice Caller ID > Off .
Supported Bluetooth Profiles
All the Bluetooth settings you configure are stored in
your phone’s Bluetooth user profile. Different profiles
can be used for specific Bluetooth functions.
ⅷ HSP: Headset Profile – This profile functions as a
wireless ear jack. When an incoming call is received,
the ringer can be heard through the headset instead
of through the phone. The call can then be received
by pushing a button. While using the phone, you can
use the headset instead of the phone by pushing a
button on the headset, the same as inserting a jack
into the phone. Increase or decrease the volume by
using the volume key on the side of the phone.
M520_Sprint.book Page 119 Thursday, September 18, 2008 12:34 PM