Sharp MX-7001 - Manual (Page 702)

99
System Settings for Fax (Administrator) List
When the system settings for fax are accessed with administrator rights, the following items appear. For information on
the general settings, see "
System Settings for Fax (General) List " (page 93).
■ Image Send Settings
• For the procedure for using the system settings (administrator), see " Accessing the System Settings (Administrator) " (page 29).
• Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings.
Item Factory default setting Page
■ Image Send Settings
101
● Fax Settings 101
X Fax Default Settings 101
‹ Fax Own Name and Number Set – 101
‹ Dial Mode Setting Tone 101
‹ Auto Wake Up Print Enabled 101
‹ Pause Time Setting 2 sec. 101
‹ Speaker Settings
101
• Speaker Volume: Middle
• Ringer Volume Volume: Middle
• Line Monitor Volume: Middle
• Fax Receive Complete Signal Volume: Middle; Tone Pattern: 3
Transmission Complete Sound Time
Setting: 3 sec.
• Fax Send Complete Signal Volume: Middle; Tone Pattern: 3
Transmission Complete Sound Time
Setting: 3 sec.
• Fax Communication Error Signal Volume: Middle; Tone Pattern: 3
Transmission Complete Sound Time
Setting: 0.3 sec. each
• Speaker Volume Details Setting Speaker / Line Monitor
Small: 3, Middle: 6, Big: 8
Ringer Volume / Reception End
Signal / Transmission End Signal /
Fax Communication Error Signal
Small: 2, Middle: 4, Big: 8
‹ Remote Reception Number Setting 5 101
‹ Original Print on Transaction Report Print Out Error Report Only 102