Sharp MX-7001 - Manual (Page 121)

40
Punch function
If an optional punch module is installed, holes can be punched in output.
Paper that can be punched is 7-1/4" x 10-1/2" to 11" x 17" (15 lbs. to 68 lbs.) (B5R to A3 (55 g/m
2 to 256 g/m 2 )).
However, 12" x 18" (A3W) sized paper and special media such as transparency film and tab paper cannot be used.
Original placement orientation (for the staple sort and punch functions)
When using the staple sort function or the punch function, the original must be placed as shown below to enable stapling
or punching in the desired position on the paper.
• The saddle stitch and hole punch functions cannot be used together.
• Tab paper can be punched manually using the inserter. For more information, see "INSERTER" in the User's Guide.
Staple sort Punch
Document feeder tray Document glass Document feeder tray Document glass
[Original 1] [Punch positions]
[Examples]
[Original 2] [Punch positions]
abc abc
abc abc abc abc
abc
abc
abc
abc