Sharp MX-7001 - Manual (Page 32)

32
Loading transparency film
When loading transparency film, load the film in the vertical orientation with the rounded corner at the top right.
2
Pull out the tray and attach the guide.
Slide the guide plate to the position of the bottom edge of the
tab paper and attach the guide so that it covers the guide plate.
3
Insert the tab paper into the tray.
Place the tab paper with the print side face up so that the tab is
to the left.
[Example]
Make sure that the positions of the tabs correspond with the originals as shown below.
4
Gently push the tray in and set the paper
type to tab paper.
Change the paper type setting to tab paper as explained in
"Paper Tray Settings" in the System Settings Guide.
ABC
DEF
GHI
JKL
Front
side
1st sheet 4th sheet 2nd sheet
3rd sheet
3rd sheet
2nd sheet 1st sheet
4th sheet
Bottom
Top
Originals Tab Paper