Sharp MX-7001 - Manual (Page 633)

30
When User Authentication is Enabled
When " User Authentication Setting " (page 46) is enabled, follow the procedure below to log in.
When user authentication is by login name and password (and e-mail
address)
When auto login is enabled, the login screen will not appear.
Administrator login is performed in the user selection screen. For more information on the login procedure when user
authentication is enabled, see "USER AUTHENTICATION" in the User's Guide.
1
Touch the [Admin Login] key.
2
Log in.
(1) Touch the [Password] key.
Enter the administrator password in the administrator
password entry screen.
(2) Touch the [OK] key.
• If login name / password / e-mail address is selected for the authentication method, the [E-mail Address] key will
appear below the "User Name".
• For the factory default administrator password, see "TO THE ADMINISTRATOR OF THE MACHINE" in the Safety
Guide.
• This completes the administrator login procedure. The system settings (administrator) can be used.
All Users ABCD EFGHI JKLMN OPQRST UVWXYZ
1
2
Name 11
Name 9
Name 7
Name 5
Name 3
Name 1
Device Account Mode User Selection
Name 12
Name 10
Name 8
Name 6
Name 4
Name 2
Back
12 18 6
Direct Entry
User
ABC
Admin Login
User Authentication OK
Login Name
Login Locally
User Name Administrator
Password
Auth to:
(2) (1)