Sharp MX-7001 - Manual (Page 346)

117
• Completed job
Message Status
"Send OK" Transmission completed.
"In Memory" Reception completed but the fax
has not been printed. (The
received fax is being held by the
print hold function.)
"Printed" The received fax has been printed.
"Forward OK" The received fax has been
forwarded.
"Stopped" The job was stopped.
"Number of
successful
transmission
destinations /
Total
destinations
OK" Broadcast transmission or serial
polling completed.
If transmission to 3 destinations
was successful out of a total of 5,
"003/005" will appear.
"No
response" An error occurred because there
was no response from the
destination.
"Busy" An error occurred because the
other party was busy.
"Reject
Reception" A fax was sent from a party that
has been blocked by the anti junk
fax function.
"NGxxxxxx" Transmission/reception was not
successful because a
communication error occurred (a
6-digit error code appears in
xxxxxx.)
"Error" An error occurred while the job was
being executed.