Sharp MX-7001 - Manual (Page 290)

61
Special modes menu (2nd screen)
(1) [Transaction Report] key
☞
CHANGING THE TRANSACTION REPORT PRINT
CONDITION FOR A SINGLE TRANSMISSION
(page 125)
(2) [Own Name Select] key
☞
TEMPORARILY CHANGING THE SENDER
INFORMATION (Own Name Select)
(page 87)
(3) [Memory Box] key
☞
SENDING A FAX WHEN ANOTHER MACHINE
POLLS YOUR MACHINE (Polling Memory)
(page
91)
(4) [Polling] key
☞
CALLING A FAX MACHINE AND INITIATING
RECEPTION (Polling)
(page 88)
[OK] key and [Cancel] key
In some cases two [OK] keys and one [Cancel] key will appear in the special mode screens. The keys are used as
follows:
(A) Enter the selected special mode setting and return to the base screen.
(B) Enter the selected special mode setting and return to the special modes menu screen. Touch this key when you
wish to continue selecting other special mode settings.
(C) During selection of special mode settings, this key returns you to the special modes menu screen without saving the
settings. When settings have been completed, this cancels the settings and returns you to the special modes menu
screen.
Transaction
Report
Own Name
Select
Memory Box Polling
OK Fax/Special Modes
2
2
(1) (2)
(3) (4)
☞
Special modes menu (1st screen) (page 60)
Special modes can generally be combined with other special modes, however, there are some combinations that are not
possible. If a prohibited combination is selected, a message will appear in the touch panel.
Fax/Special Modes
Erase
Center
Erase
Edge
Erase
Edge+Center
Erase Edge
Cancel OK
OK
1/2
(0~1)
inch
(C)
(A)
(B)