Sharp MX-7001 - Manual (Page 640)

37
■ Printer Settings
■ Image Send Settings
Item Factory default setting Page
■ Printer Settings
70
●
Default Settings 70
X Prohibit Notice Page Printing Enabled 70
X Prohibit Test Page Printing Disabled 70
X A4/Letter Size Auto Change Disabled 70
X Print Density Level
70 ‹ Color 3
‹ Black & White 3
X Bypass Tray Settings 70
‹ Enable Detected Paper Size in Bypass Tray Disabled 70
‹ Enable Selected Paper Type in Bypass Tray Enabled 70
‹ Exclude Bypass-Tray from Auto Paper Select Disabled 70
X Job Spool Queuing Enabled 70
● Interface Settings 71
X Hexadecimal Dump Mode Disabled 71
X I/O Timeout 60 sec. 71
X Enable USB Port Enabled 71
X USB Port Emulation Switching Auto 71
X Enable Network Port Enabled 71
X Network Port Emulation Switching Auto 71
X Port Switching Method Switch at End of Job 71
● Auto Color Calibration – 72
Item Factory default setting Page
■
Image Send Settings
73
● Operation Settings 73
X Other Settings 73
‹ Default Display Settings Scan (fax when fax is installed)
73
• Hold settings for a while after scanning has been
completed
Disabled
• Switch Automatically to Copy Mode Screen Enabled