Operating more than one handset – Siemens Gigaset 2010 User Manual
Page 61
Operating more than one handset
51
KAP16.FM5
14.8.98
Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619
Operating more than one handset
Ring priority for incoming calls
It is possible to set how incoming calls should be signaled
when operating several handsets. A distinction is made
between:
●
Collective call (factory default) – incoming calls are
signaled to all registered handsets.
You can exclude individual handsets from the collec-
tive call and reintegrate previously excluded hand-
sets.
●
Ring priority – an incoming external call is first signa-
led to a prioritized handset. If this party does not ac-
cept the call, the system automatically switches to
“collective call” after an adjustable number of rings.
Switching between collective ringing and ring priority
B
# 1
Start the setting procedure.
o
Enter the four-digit base code (factory default:”0000“)
(➔ page 19).
O
* 2 3
The current setting is shown on the display
:
1
B
Set collective ringing.
or
2
B
Set ring priority.
n23 1
P f
N
b
(Example:1 = collective
ringing is set)