Siemens Gigaset 2010 - Manual (Page 44)

Individual settings on the Gigaset 2000S mobile unit
34
Kap10.fm5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619
Individual settings on the Gigaset 2000S mobile unit
You can configure your mobile unit individually. All settings
are made directly at the mobile unit. If a number of mobile units
are in operation, the mobile unit must be logged on at the base
station
n (➔ page 49).
Setting the ringer volume
You can set the ringer volume in the handset on 6 levels.
These range from level 1 = low to level 6 = high (factory
default).
Setting the ringer tone
You can set the ringer tone on your handset to one of 6
levels. The factory default is level 1.
You can also set the volume of the base
station ringer (➔ page 32).
B
5 Start setting procedure. The selected ringer volume is
sounded. The set ringer level is indicated on the display:
:
o B Enter the applicable digit for the required ringer volume
(1 to 6) and save.
5 6
P f
N
(Example: ringer level 6 is
set)
If several handsets are being operated in one
room, it is easier to distinguish their ringers if
they are set to different tones.
You can also adjust the base station ringer tone
(➔ page 33).
B 6 Start setting procedure. The selected ringer tone is
sounded. The set tone level is indicated on the display:
:
o
B Enter the applicable digit for the required ringer tone
(1 to 6) and save.
6 1
P f
N
(Example: tone level 1is
set)