Siemens Gigaset 2010 - Manual (Page 40)

Internal consultation calls and transferring calls
30
KAP08.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619
Internal consultation calls and transferring calls
During a external call it is possible to:
● hold a consultation call with an internal party,
● transfer the external call to the internal party.
Consultation calls
When more than one handsets are in operation
If more than one handset is in operation (➔ page 51), you
can make a consultation call to an internal party during a
call with an external party. The external party cannot hear
your conversation with the internal party and will hear mu-
sic while on hold.
End consultation/continue external call
When a telephone system is in operation
You can make a consultation call to a party in your tele-
phone system during an external call. Please check the
operating instructions for the telephone system.
End consultation/continue external call
Consultation calls and call transfer are only
possible if
● more than one handset is in
operation(➔ page 51).
I
o
Press the internal key. Enter the number of the handset
which you wish to call (1 to 6). You will hear the internal
ring tone. The handset is being called. The external call is
under way.
R
End the internal consultation call. You are now reconnec-
ted to the external party.
R
Set up a consultation call. You will hear the dial tone.
The external call is under way.
o
Enter the desired extension number. The relevant party is
called.
R
End the internal consultation call. You will be reconnec-
ted with the external party.