Siemens Gigaset 2010 - Manual (Page 28)

Operating modes
18
KAP04.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619
Exchange codes
For through connection to the public telephone network
you must set:
● the exchange code
● the pause length after the exchange code (if a pause
is necessary after entry of the exchange code)
If the telephone system is connected as a subsystem to
a main system, you must set the:
● the exchange code
● the pause length after the exchange code
Entering the exchange code
The exchange code has one to three characters and can
comprise the digits 0 to 9 and the : , # and R
keys.
For the pause length to be entered after the ex-
change code, please consult the documentation
about your telephone system.
B
# 0
Start the setting procedure.
o
Enter the four-digit base code (factory default: “0000“)
(➔ page 19).
O Select the exchange code.
o
Enter the exchange code. If more than one exchange
code is available, you can enter the next exchange code
by pressing O .
B Store setting.