Siemens Gigaset 2010 - Manual (Page 36)

External outgoing calls
26
KAP06.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619
Dialing speed dial numbers
You can dial a call number by pressing the digit key used
to store the number
(➔ page 38).
Dialing with speed dial numbers and number check
c Press off-hook key. You will hear the dial tone.
Q
o
Press speed dial key and enter speed dial number (0 to 9)
of the desired number.
or
Q Press the speed dial key until the desired memory posi-
tion and call number appear,
e.g.:
:
and
o Enter displayed digit (e.g. 4) to transmit the call number.
4 123456
f
N
b
F
Q
o
Press the speed dial key and enter the speed dial code
(0 to 9) for the required number.
Q If nessesary, press speed dial key to delete last digit.
or
Q
If you are not sure of the speed dial code for the required
number: keep pressing the speed dial key until both num-
bers appear on the display.
and
c The number is dialed .
or
a
If the number has been selected incorrectly, press this
key. The selection is cancelled. Repeat the process.
If you press a digit key on which no speed
dial number is stored, you hear error tone.