Siemens Gigaset 2010 - Manual (Page 32)

Incoming calls
22
KAP05.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619
Incoming calls
Accepting calls
An incoming call is indicated by the ringer (bell symbol).
You will know that it is an external call when you the
following message appears on your handset display:
You will know that you are receiving an internal call if you
see the following message on your handset display (the
example shows an incoming call from a second handset):
If the handset is in the charging unit:
If the handset is not in the charging unit:
:
- - -
f
N F
:
2
f
N G
Remove the handset from the charging unit. You are con-
nected.
The automatic acceptance of calls by removing
the handset from the charging unit is an adjust-
able setting (➔ Seite 37). If you have switched
this function off, you must press the c button
when you have removed the handset from the
charging unit.
c Press the off-hook key on the handset.
You are connected.