Siemens Gigaset 2010 User Manual
Page 14
Stepwise startup
4
KAP02.FM5
14.8.98
Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619
Step 6: Check signaling method
Telephone lines can use the following signaling methods:
●
dial pulsing (DP)
●
dual-tone multifrequency signaling (DTMF)
The factory default for your Gigaset 2010 is DTMF.
Checking your own telephone’s signalling method
Setting the phone to dial pulsing (DP)
You can now make external calls with your Gigaset 2010.
c
Press the off-hook key (corresponds to picking up the
handset on an ordinary phone). You will hear the dial
tone.
o
Press any digit, e.g. 2. If you can still hear the dial tone
you will have to set the signaling method to dial pulsing
(DP).
B
#1
Start the setting procedure.
o
Enter the four-digit base code (factory default:”0000“)
(➔ page 19).
O
033
B
Set dial pulsing (DP).
The other signaling method settings are inten-
ded for the operation of the Gigaset 2010 in
telephone systems (➔ page 17 ).